Skip to content

DiGiCo SD / Quantum

The integration for DiGiCo mixers has some serious limitations due to the incomplete OSC API of the mixer.

If you want to have more features / use Mixing Station properly, please let DiGiCo know about it!

However, you can still use Mixing Station to provide personal monitoring mixing using web access!

Configuration

  1. On the mixer go to Setup -> External Control
  2. Enable External Control: Yes
  3. Press add device -> DiGiCo Pad
  4. Enter the IP address of the device running Mixing Station. You can leave the ports default
  5. Make sure the entry is marked as Enabled
  6. Load the ipadv2sd8 command set
  7. In Mixing Station enter the same ports as shown on the mixer, see screenshot below as an example

digico-config.png

Limitations (due to mixer firmware)

  • Metering: Only the current layer will be requested from the mixer. This is done as the API has quite a lot of overhead to ensure the network isn't clogged.
  • Only 1 client per mixer
  • No routing
  • On some SD models: No headamp control depending on the input
  • Not all channel parameters accessible