Skip to content

User / Session settings

This page provides access to all session and user settings

Open settings

The app settings can be opened via the menu from the mixer view

Menu -> Setup -> App

App tab

General settings The first tab contains all app settings. The different setting categories are displayed to the left.

Press ? for more details. Some special settings are explained here in more detail.

The channel strip tab is explained on its dedicated page.

Setup wizard

Restarts the setup wizard that is shown the first time the app is opened.

Orientation lock

If supported by the platform, you can lock the orientation of the device. If not available please use the OS mechanism for locking the screen orientation.

Autosave

When enabled, this feature automatically saves all User Settings under the name default.

USB Midi

Enables the USB midi stack. This should only be enabled if you're using this functionality as it consumes more power.

Windows

Desktop only

These settings allow you to configure the multi window behaviour of the app.

Mixer category

Mixer settings These settings are related to the mixer and channel views.

Global knobs / sliders

This section configures how the knobs and sliders behave. The settings apply to all knobs in the app except sliders in a channel strip, which are configured in the Channel Strip tab.

DCA Spill

Enables a Midas Pro style popgroup functionality. When tapping on a channel button of a DCA/IDCA group, the assigned channels will be shown in the mixer instead of opening the DCA/group. To edit an DCA/IDCA while popgroup mode is enabled, press and hold the channel button.

When selecting an IDCA in popgroup mode, the displayed channels do not follow the currently selected sends on fader selection. Instead the assigned target mix of the IDCA is used.

Follow Layers

When enabled, the <- and -> buttons in the channel view follow the current layer instead of the default channel order.

Example

With the option enabled, suppose your current layer configuration is as follows:

Band
    Ch 1
    Ch 2
    Ch 3
    Ch 5
Vocal
    Ch 11
    Ch 13
    Ch 14

If you open Ch 5 and press ->, will move to Ch 11 instead of Ch 6.

FX Popup

When enabled, shows tap delay buttons in the mutegroup popup.

SoF list

When enabled, shows a "sends on fader" list instead of the dropdown menu.

RTA Follow

When enabled, the app will always change the RTA source to the currently open channel. Depending on the mixer this means that the app will change the PAFL selection.

Metering category

Mixer settings This section is used to configure signal metering and RTA.

Meterbridge

Shows a meterbridge on top of the mixer. The number of meters per group follows your visible channels layer configuration.

Peak hold

Defines how long the peak indicator should be shown before resetting.

Decay

Defines how fast the meter should decay (fall down).

GR level plot

Enables a history plot of the dynamics input and gain reduction signal. timeline

Tap points

Depending on the mixer you can change the signal tap points that should be used for the meters. If your mixer doesn't support this feature it will not be shown in the app.

See app-link