Skip to content

Sends on faders

Sends on faders allows you to quickly access all sends to a certain mix. When enabled, all faders will show the level sent to the selected mix, instead of your main mix.

Example:

When pressing "Mix 1" the faders will now show the signal contribution of the channels to "Mix 1" instead of your "Main LR" mix.

Channels which can't send a signal to the currently selected mix will be hidden.

It is also possible to show the channel gains on the faders (at the very bottom of the list).

UI Configuration

There are two possible UI modes available:

SoF list enabled (default) SoF list disabled
Sidebar Sidebar
This is the default UI mode. Here each mix is represented by a button. Pressing that button will enable sends on fader mode. In this UI mode all mixes are hidden behind a context menu button. If you press this button you can select the mix. Additionally, you have to press the Snd-Fader button to enable sends on fader.

Bus master

The bus master is the main channel of the currently selected mix. If sends on fader is disabled this will correspond to the LR mix, otherwise it the selected mix.

Gain on faders

At the very end of the sends on fader selection is a Gain item. When selected the fader knobs will turn red and show the current gain of the channel.

Configuration

It's possible to change the order of the mixes in the list, as well as hide any unused mixes, see layer setup for more details.